|Iron Patriot - Iron Man 3 Paper Model Part 3|
Attach the knee hinge (part 32) with combining first with part 31. Insert them into the lower leg part and glue them with super glue, or with a lot of PVA glue and let it cured well.
Assembly the upper leg base part (part 28,29,30 and 14).
Attach the accessories part on the upper leg part. You may want to layer part 37 with cardboard to add thickness.
Insert the knee axle part 35 in place. You can fill inside part 35 with rolled of paper and glue it to add strength or you can use other material instead of paper that is stronger.
Cover the knee joint with part 33 and then attach part 33. Finally cover the lower knee with part 11,36 and 44.
Assembly the display base with part 47,48 and 49. You can layer part 48 with cardboard from inside to add strength or you can use part 51 inside the base to add support to the model weight.
You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com
Iron Patriot - Iron Man 3 Paper Model Part 3 template (colored)
Iron Patriot - Iron Man 3 Paper Model Part 3 template (blank)
|< Prev||Next >|