Piper Seneca RC Plane

Print

Piper Seneca was once on my wishlist, finally I can get my hand on this type of aircraft. At first I already planned to make Piper Seminole but I thought its T-tail will bring a hard time to build. So to make simple but scale model I choose Seneca II and the end result is surprisingly easy to build. The wing is very similar than the Cherokee that I already built and flown. The performance also very similar to the Cherokee, but with more powerful thrust with twin motors. In this project also the first time I ever use motor for quad/ drone race.

 

Specs :

1. Wingspan 1200mm / 47.2 inches

2. Flying weight : 900 grams/ 31.7 oz

3. Wing loading : 43 gram/dm2 - 14.1 oz/sq.ft.

4. Wing cube loading : 9.4

5. Wing Area : 20.9 dm2 / 324 sq.in.

6. CG : 3.5 cm

 

Electronics

- 2305 2300-2700kv brushless motor with 6 inch 3 blade propeller (x2)

- BLHeli 30A ESC  (x2)

- Battery Lipo 3S 2200mah / Li-on 3000mah

- 4 plastic gear 9 gram servos (micro servo)

 

Materials :

1. 5mm  Depron/ Polyfoam

2. 3mm + 7mm Plywood

4. 0.3mm + 0.5mm Mica Plastic

5. hot glue, UHU glue, CA glue

6. packing tap/wax paper/ laminating film

 

 

 

 

 

 

 

 

Open the PDF file with Adobe Acrobat Reader (recommended software)

PDF security password : none

 

{ads2}

 

Piper Seneca RC Plane Plans A4

Piper Seneca RC Plane Plans A0

Piper Seneca Decal A4

Build Video on Youtube


Open the PDF file with Adobe Acrobat Reader (recommended software)

PDF security password : none

 

{ads2}

 

Piper Seneca RC Plane Plans A4

Piper Seneca RC Plane Plans A0

Piper Seneca Decal A4

Build Video on Youtube